Keder Fittings
Place the drill guide at the end of the keder. Drill a 25mm deep hole & remove the drill guide. Use a hot air gun and heat the keder splice or keder shield to approximately 250 degree Celsius & insert into predrilled hole.
Listing Details
Description
Keder shield - goes onto the end of keder to prevent fraying and easy insertion onto the track (D-11 | d-5 | L23)
-------
Description
Keder splice plug - used for joining keder (D-5 | d-3.2 | L-50)
-------
Description
Keder drill guide - used to fit the keder shield & keder splice (d-11 | d-4)
